Fully-Welded Truck Racks
Starting at $1380
No shipping available for truck racks — pick up or install only
A Rack That Works as Hard as You Do
Your truck rack doesn’t just carry the weight of your materials; it carries the weight of your reputation. Sterling truck racks are for the professional who refuses to compromise. While other racks vibrate and wear down over time, our seamless, fully welded design provides a solid foundation for your gear. It’s more than a utility; it’s a performance upgrade for your truck, designed to handle maximum capacity while maintaining a clean, professional look that commands respect on every site.
The Last Rack Your Truck Will Ever Need
Job Site Tough. Built for the Long Haul.
Fully-Welded
One piece construction for maximum structural integrity and rigidity
Over the Cab Design
Front edge of the rack is even with the top edge of the windshield
Cargo Side Rails
Cargo side rails are 6” tall to keep your gear secure and contained
Tie Downs
Tie downs on each support leg
Grab Handles
Ergonomic integrated grab handles for easy cargo access
All bent components are mandrel bent, which keeps the tubing round and strong all the way through the curve
Mandrel Bent
More support gussets than comparable racks for maximum payload and stability
More Support Gussets
Main rack body and support legs are made with heavy-duty 2” round steel tubing. Cargo side rails, support gussets, and bars over the cab are made with heavy-duty 1.25” round steel tubing.
Heavy Duty Materials
Full bed length mounts made with 2”x2” steel angle for maximum weight distribution
Secure Mounting
High-durability black satin finish for weather resistance and excellent UV-stability.
Powder Coated
Optimized gap between the cab and rack to reduce wind noise for maximum in-cab comfort
Reduced Wind Noise
Shields the truck cab, reducing the chance of hauled cargo from impacting or damaging the top of the truck.
Cab Cross Over Bars
Two crossover bars over the bed; one at the tailgate and one over the center of the bed. Both are removable for easy bed access.
Removable Bed Bars
What ever your truck can hold, our rack can hold. Never overload your truck! We have tested our racks up to 3,500 lbs.
Weight Capacity
Built for Your Specific Vehicle and Needs
-
![Sterling Truck Rack in a field]()
Chevy Silverado 2500 HD Regular Cab with Knapheide 696F
+ Quick Release Pins
-
![Sterling truck rack on concrete]()
Chevy Silverado 1500 Crew Cab with Short Bed
+ Quick Release Pins
-
![Sterling Truck Rack painted green in a field]()
Chevy Silverado 2500 HD Crew Cab with Long Bed
+ Plywood Shelf
-
![Sterling Truck Rack in front of a building]()
Ram 2500 HD Crew Cab with Long Bed
+ Ratchet Straps
+ Quick Release Pins
-
![Sterling truck rack on a new Ranger pick up truck]()
Ford Ranger
+ Quick Release Pins
-
![Sterling truck rack painted red]()
GMC Sierra 2500 HD Crew Cab with Short Bed
+ Plywood Shelf
+ Ratchet Straps
+ Custom Powder Coat Color
-
![Sterling truck rack from behind in a field]()
Ford F-150 Super Cab with Short Bed
+ Ladder Hangers, both sides
+ Rope Hangers, both sides
-
![Green sterling truck rack on truck in a field]()
Ford Maverick
+ Extension Ladder Holders
+ Custom Powder Coat Color
-
![Sterling truck rack against the sky]()
Ford F-250 Crew Cab with Short Bed
+ Quick Release Pins
-
![Sterling truck rack with plywood shelf]()
Chevrolet Silverado 2500 HD with Knapheide 696
+ Plywood Shelf
-
![Sterling truck rack with yellow bed cross over bars]()
Chevrolet Silverado 2500 HD Double Cab with Long Bed
+ Yellow Powder Coated Bed Cross Bars, + Mesh Over Cab, + Mesh Front Pipe Stop, + Ratchet Straps, + Quick Release Pins
One size doesn’t fit all. We specialize in creating racks tailored to meet your specific needs.
Customize to Fit Your Needs
Fully Welded
Experience the difference of a fully welded rack – strength and quality you can trust!
We only use heavy duty steel, providing you with a durable, reliable, and functional solution for all your hauling needs.
Heavy Duty Steel
Customization Options
-
![Close-up of a metal clamp or mount attached to a black horizontal pipe in an outdoor setting with a blue sky and trees in the background.]()
Ratchet Straps
Heavy duty (500-lbs. load) ratchet strap set. Attached to the side of the rack for easy securing
-
![Close-up of a black metal roof rack mounted on a white vehicle, with a clear blue sky and green trees in the background.]()
Ladder Hangers
L-shaped arms on the side of the rack intended for holding ladders
-
![Close-up of a Sterling truck rack crossover bar with a shiny, metallic pin.]()
Quick Release Pins
Replaces the bolting hardware on the removable crossover bars over the bed for fast removal without using tools
-
![Rear view of Chevrolet Silverado pickup truck with black metal rack mounted in the truck bed]()
Rear Window Protection
Integrated cab guard for rear window protection
-
![Close-up of a black metal mesh platform with a stairway attached, outdoors with trees and a clear blue sky in the background.]()
Front Stop
Expanded steel mesh added to the front of the rack to prevent the load from sliding out forward
-
![White pickup truck with a large green truck rack, parked outside under a blue sky with some clouds.]()
Plywood Shelf
Shelf that hangs below the rack, with stops in the front and back, made for carrying 8' plywood sheets
-
![Close-up of a utility truck with a black metal rack installed on the roof, against a blue sky with some clouds.]()
Mesh Over the Cab
Expanded steel mesh added to the rack to create a barrier between the load and the cab
-
![Close-up of shovel holders, set against a clear blue sky.]()
Shovel Holders
2” wide tubing intended for holding shovels or rakes, welded to the rack
FAQs
-
Sterling truck racks are fully welded and constructed with heavy duty steel. We have tested the carrying strength of our standard truck rack up to 3,500 lbs. (Distributed load over the rear removable crossover bars). We would have tested it further, but we ran out of heavy stuff to put on it! However, please do not attempt to carry more weight than your truck can safely hold. If you plan to haul something super heavy, let us know!
-
Yes! Our truck racks can hold a ladder… and plywood sheets, lumber, pipes, garage doors, shovels, etc. We also offer ladder hangers that allow you to hang your ladder on the side of your rack, while keeping the rack available for all of your hauling needs!
-
Yes! We can install the truck rack for you at our location in Umatilla, FL. Just let us know you would like it to be installed when you order.
-
Our truck racks are fully welded, meaning that they are solid, one piece racks. There are not thousands of bolts holding each component together; they are instead permanently joined together with the power of melted metal. When we do have to use bolts—such as when we construct a rack in two parts for powder coating purposes—we utilize Grade 8 hardware. Grade 8 is highest strength bolts under the SAE J429 standard.
Get a Quote
Ordering Process
-
Contact us and get a quote! We will ask for the following:
Year, Make, Model of your vehicle
Product you would like
Cab style and bed length, if necessary
-
Once you decide to place the order, we will send you a sales order confirmation via email. We will request that you reply with a “Good to go!” if everything is correct.
-
Once the “Good to go!” is received, we will send you a payment link for a 50% deposit. Once the payment is received, we add your order to the schedule to be made.
-
Over the next few weeks, your product will be individually handcrafted and powder coated.
-
Once your product is complete, you will receive an email from us that includes your invoice and another payment link.
-
Once payment is received, your custom made product will be shipped to you (or picked up, or installed). Enjoy!
Shipping is not available for truck racks. If you are unable to bring your truck for installation or unable to pick up the rack to install yourself, you can reach out to a local truck outfitting company. They may offer a service in which they can get the truck rack from us for you.