Grille Guards
Every guard is built to order, so make it what you want!
Choose Your Style
Fully Welded
Experience the difference of a fully welded guard – strength and quality you can trust!
We only use heavy duty steel, providing you with a durable, reliable guard.
Heavy Duty Steel
Shipping available to USA (excluding Hawaii and Alaska)
Bear Model
Center section guard, no headlight hoops
Starting at $800
The Bear Model includes the following:
(A) Side plates contoured to the front of the vehicle, made with 5/16” thick steel
(B) Cross bars at top and bottom, 2” OD 11-gauge steel
(C) Winch mount options (low profile, heavy duty, and without winch available)
Coyote Model
Center section guard with headlight hoops
Starting at $1315
The Coyote Model includes the following:
(A) Side plates contoured to the front of the vehicle, made with 5/16” thick steel
(B) Cross bars at top and bottom, 2” OD 11-gauge steel tubing
(C) Winch mount options (low profile, heavy duty, and without winch available)
(D) Headlight protection hoops, made with mandrel bent 2” OD 11-gauge steel tubing
(E) Bar within the headlight hoops for added protection, made with 1.25” OD 13-gauge steel tubing
(*Push Pads/Jammers and hood bar as shown are not standard on the Coyote Model.)
Gator Model
Guard with all the bells and whistles
Starting at $1520
The Gator Model includes the following:
(A) Side plates contoured to the front of the vehicle, made with 5/16” thick steel
(B) Cross bars at top and bottom, 2” OD 11-gauge steel
(C) Winch mount options (low profile, heavy duty, and without winch available)
(D) Headlight protection hoops, made with mandrel bent 2” OD 11-gauge steel tubing
(E) Wires within the headlight hoops, made with 3/8” solid steel rod
(F) Hood bar, 1.25” OD 13-gauge steel tubing
(G) Push Pads (“jammers”) with a heavy duty vinyl wrap along the front edge of the side plates
Installation Done Right
One of our goals is to make sure that the installation process for our guards requires minimal alterations to your vehicle. All of the hardware, brackets, and instructions for installation are included with your guard.
Options
-
Grille Mesh
Expanded steel mesh #9 added to the upper guard face
-
Light Mounts
Bar added to the center section of guard with 2 light mount tabs
-
Push Pads/Jammers
Steel strips welded to the front edge of side plates, wrapped in heavy duty vinyl (Standard on the Gator Model)
-
Hood Bar
1.25” OD 13-gauge steel tubing, mandrel bent and welded to the top of the guard (Standard on the Gator Model)
-
2" Receiver
2” receiver welded to the underside of the winch cradle
-
Zinc Primer
Extend the life of the powder coat
2024-2025 Ford F150 (Bear Model without winch cradle. Added Push Pads/Jammers.)
2024-2025 GMC Sierra 2500/3500 HD (Gator Model with low profile winch cradle)
2023-2025 Ford Super Duty (Gator Model with heavy duty winch cradle. Added Grille Mesh.)
2020-2023 Chevrolet Silverado 2500/3500 HD (Coyote Model without winch cradle. Added Push Pads/Jammers and hood bar.)
2021-2023 Ford F150 (Gator Model with low profile winch cradle. Added Grille Mesh.)
2020-2022 Ford F150 (Gator Model with no winch cradle)
2019-2023 Chevrolet Silverado 1500 (Bear Model without winch cradle. Added Push Pads/Jammers.)
201-2019 Dodge Ram 2500/3500 (Gator Model with heavy duty winch cradle)
2018-2020 Ford F150 (Bear Model with low profile winch mount)
We can make grille guards for the following years, makes, and models:
-
Silverado 1500 (1981 - 2023)
Silverado 2500/3500 HD (1988 - 2025)
Silverado 4500 (2005 - 2009)
Avalanche 1500 (2003 - 2014)
Blazer (1981 - 1991) & (1995 - 2004)
Colorado (2025)
Canyon (2004 - 2012)
Express Van G2500/G3500 (2003 - 2017)
S-10 (1995 - 2004)
Suburban 1500 (1992 - 2020)
Suburban 2500 (1992 - 2006)
Tahoe 1500 (1992 - 2020)
Tahoe 2500 “Classic” (1992 - 2000)
Trailblazer LT (2003 - 2009)
-
Dodge Ram 1500 (1981 - 2015)
Dodge Ram 2500/3500 HD (1994 - 2019)
Dodge Ram 4500/5500 HD (2006 - 2026)
Dakota (1997 - 2001)
Durango (1997 - 2001)
-
F150 (1992 - 2025)
Ford Super Duty F250/350/450/550 (1992 - 2026)
Van E150/250/350 (1997 - 2006)
Excursion (1999 - 2014)
Explorer (1999 - 2010)
Ranger (1998 - 2011)
-
Sierra 1500 (1981 - 2015)
Sierra 2500/3500 HD (2001 - 2019) & (2024 - 2025)
Canyon (2004 - 2012)
Jimmy (1981 - 1991)
Savana Van G2500/G3500 ( 2003 - 2017)
Sonoma (1998 - 2002)
Yukon 1500 (1992 - 2000) & (2007 - 2014)
Yukon XL (2000 - 2010)
Yukon 2500 “Classic” (1992 - 2000)
-
Frontier (1998 - 2000) & (2014 - 2020)
Hardbody (1993 - 1997)
Pathfinder (1992 - 1995)
Titan (2004 - 2014)
-
Landcruiser (1998 - 2007)
Tacoma (1998 - 2016)
Tundra (2000 - 2013)
Please note: Grille guards will not fit properly when the following have altered the vehicle:
- Collision damage
- Frame damage
- After market bumper
- Body lifts (Suspension lifts are ok)
- Other grille/front bumper modifications
Also note that guards may interfere with sensors in the front bumper.
Made in USA
3rd Generation Family Owned & Operated
49 Years in Business
Get a Quote
Ordering Process
-
Contact us and get a quote! We will ask for the following:
Year, Make, Model of your vehicle
Product you would like
Cab style and bed length, if necessary
-
Once you decide to place the order, we will send you a sales order confirmation via email. We will request that you reply with a “Good to go!” if everything is correct.
-
Once the “Good to go!” is received, we will send you a payment link for a 50% deposit. Once the payment is received, we add your order to the schedule to be made.
-
Over the next few weeks, your product will be individually handcrafted and powder coated.
-
Once your product is complete, you will receive an email from us that includes your invoice and another payment link.
-
Once payment is received, your custom made product will be shipped to you (or picked up, or installed). Enjoy!